5 Step Guide To Spring Oil Changes And Maintenance To Get Your Tractor Ready For Work This Summer


If you have planted fields with crops for fall harvests, there is a lot of work that will need to be done with your tractor from spring through summer. Therefore, you are going to need to do oil changes and maintenance to get your tractor ready for the work that needs to be done. The following step-by-step guide will walk you through changing the oil, filters, and other maintenance that needs to be done before you start working the fields:

Check the Oil, Hydraulic System and Other Systems to Take Note of Maintenance That Needs to Be Done

You will want to begin the tractor maintenance by inspecting your equipment. Check the levels of the oil, transmission case, and hydraulic pump fluids. When you check the levels, look for discolorations and signs of problems like metal particles, which could mean other repairs are needed. The oil you will want to change even if it looks clean, but other hydraulic and transmission case fluids may be fine if they are clean. You will want to make sure that all the parts of your tractor are greased.

Parking Your Tractor in An Area Where You Can Drain and Store the Oil and Other Fluids

To do the maintenance that needs to be done, you will want to park it in a pole barn, garage, or open area where you have space to do the work. Start by draining the oil from the engine and store it in a container to be recycled or used to grease exposed metal parts. If you need to change other fluids, do the same thing, and store them in a different container than the used engine oil.

Inspecting Your Tractor Engine Oil and The Hydraulic Fluids for Signs of Problems That Need to Be Repaired

Once you have drained all the fluids, you will want to continue by inspecting the tractor for problems that need to be repaired. Look for signs of damage like cloudy oil, metal particles in the oil, or hydraulic fluid. You can also get a closer look at the parts when the tractor is not full of fluids. If you have found any problems, repair them before refilling the tractor with oil and other fluids.

Filling the Tractor Engine Oil and Hydraulic Fluids, Oil and Fuel Filter To Get Ready to Inspect Your Equipment

When you have inspected the tractor and done any needed repairs, you will be ready to change the filters. Remove all the fuel, air, and oil filters to replace them. Once you have replaced the old filters of your tractor, fill the engine oil, hydraulic fluid, and any other fluids that you have drained and plan on changing during the routine maintenance.

Cleaning the Grime from Your Tractor and Inspecting It for Oil and Hydraulic Fluid Leaks That Need Repairs

The last step in your tractor oil change and maintenance will be inspecting it for leaks. Before you begin, use a degreaser spray to remove grime from areas of the equipment that are prone to leaks and problems. Turn the tractor on and test the hydraulic system to look for oil and hydraulic fluid leaks. If there are not any leaks, you will be ready to get to work.

These are the steps that you will need to do to prepare your tractor for summer work with the oil change, new filters, and other maintenance that needs to be done. If you are ready to start with the maintenance to get your tractor ready for summer, contact a Mahindra 1526 Tractor Oil Filter supplier to get the materials you need to complete the spring maintenance. 


22 April 2020

Keeping My Workers Safe

A few months ago, I realized my farm wasn't as safe as it could be. We had outdated equipment, and sometimes it would jam--putting my workers at risk. Fortunately, a friend of mine told me about a great place that sold better equipment, so I could update things. I invested part of my yearly profits into a few new pieces of equipment, and it was amazing to see the difference it made. My employees were able to harvest food faster without putting themselves at risk. Check out this blog to learn more about how to improve your farm.